Single Station armature rotor Spot Welding Machine
Model：ND-RWD01-B
Brief introduction：The armtaure spot welding machine is used for welding the wire and terminal of No-shaft rotor,
ND-RWD01 Single Station Spot Welding Machine
Introduction：
The armtaure spot welding machine is used for welding the wire and terminal of No-shaft rotor, mechanical preliminary positioning the rotor core, the machine can be adjusted for different dimension rotor, good quality welding source, the welding parameter can be set. Welding head is driven by cylinder to move up and down, servo driven indexing. It adapts Precision resistance welding, no consumption parts, no need welding strip, welding wire and solder,etc.
Adapts special water cooling machine, high efficiency cooling circulation system ensures welding power source and transformer can continuously work under normal temperature. During welding, it has blowing system to discharge the smog to the exhaust outlet and be discharged by the exhaust fan.
The machine has remote diagnosis function.
Specification:
Dimension：1000X1200X1600（LXWXH）
Voltage：Three phase AC380V±10% 50/60HZ
Power：20KW
Rotor dia.：60-180 mm
Stack length：10-100 mm
Welding efficiency：15sec/pc
Welding displacement deformation：adjustable and controllable within 0.1～0.8mm
Welding resistance：≤0.1 milli-ohm
Circulation system : Cooling circulation system
flow velocity : ≥1000mL/min,
water temperature : can be controlled within 25℃～30℃
