The machine is suitable for open linear/segment stator winding, adopts needle winding with three needles. It winds 1pc stator one time, manually loading/unloading, automatic clamping fixture. The slot No. and turn No. can be set on HMI.
(1). Introduction and features
The machine is suitable for open linear/segment stator winding, adopts needle winding with three needles.
It winds 1pc stator one time, manually loading/unloading, automatic clamping fixture.
During winding, it can achieve multitapping(set on the HMI), wire damping, wire cutting.
The slot No. and turn No. can be set on HMI.
(2).Specification:
| Dimension: | 1100X 850X 1600(L xWx H) (exclude the wire tensioner dimension) |
| Weight: | 500KG |
| Servo mechanism: | 1pc 3KW winding motor with brake, 2pcs 750W lef-right and wire arraying motor |
| Voltage: | 380V/50Hz three phase four wires |
| Stator stackheight: | 10-80mm |
| Stator length : | 60-300mm |
| Speed range: | 0-500RPM adjustable |
| Air pressure: | 0.5-1MPa |
| Wіrе dіа.: | ф0.2-Ф1 .5mm(can be customized if special) |
| Pole No.: | multi poles |
| Power: | 20KW |
(3).Picture show
