BLDC Stator Needle Winding Machine
Model number:NXN1-100/150
Introduction:This needle winding machine has two working station. Machine movement is pre-set in the touch screen. All the winding data can be shown on the touch screen during machine running. During running, machine will alarm if something goes wrong.
This needle winding machine has two working station. Machine movement is pre-set in the touch screen. All the winding data can be shown on the touch screen during machine running. During running, machine will alarm if something goes wrong.
(1) Machine function and characteristic:
This machine is suitable for winding BLDC stator. It equips with servo system. It can automatically intert wire end, winding, arraying, indexing, cutting, demolding.
(2) Technical parameter:
Suitable OD：≤150mm
Suitable ID；≥25mm
Suitable thichness： 10~100mm
Suitable wire diameter：0.3-1.0mm
Power supply： 220V/ 50/60Hz
Weigth：600Kg
Deminsion：1400*900*2000mm
(3) Application：
This machine is suitable for winding BLDC stator.
(4)Needle winding machine working station
