Double working stations stator needle winding machine
Model number:ND-DDR-IV-B
Introduction:The stator needle winding machine Adopts Double station, auto winding, auto tapping, auto wire clamping, auto wire cutting, auto wire arraying and auto wire acrossing.
Technical Parameters of Sator Needle winding machine
(1) Main technical parameter:
1.Stator O.D：Φ30-Φ150mm
2.Stator ID: Φ10-100mm
3.Stack length: 5-125mm
3.Wire diameter：Φ0.2-Φ1.50mm,select suitable tensioner as per actual wire diameter.
4.Pole no.: could be customized
5.Winding speed：400-800rpm (adjustable)
6.Tensioner: magnetic tensioner
(2)Description:
1.Double station, auto winding, auto tapping, auto wire clamping, auto wire cutting, auto wire arraying and auto wire acrossing.
2.one winding nozzle at each winding station, wind the stator one slot by one slot, the stator is requested to have plastic bobbin
Manual stator loading/unloading, stator clamping is finished by pneumatic chuck.
3.Main controller adopts Schneider PLC, AC servo system and robot motion control system, to complete winding, arraying,
auto indexing and wire cutting. 4.Adopt Taiwan Meanwell switch power source and China made touch screen to display and
set winding parameter.
4.Adopt SMC cylinder and Korea SYC magnetic valve to complete to assist winding action.
5.Winding motor A and B axis is 4.5kw AC servo motor left-right rotation indexing,
winding motor at Z axis up-down movement is 3.0kw AC servo motor,
left-right horizontal movement at X axis is 750w AC servo motor,
front-back horizontal movement and wire arraying Y axis motor is 750W AC servo motor.
6.Adopts NSK or THK Brand screw rod and ball rail, precision degree is H(error precision is 0.01~0.02mm),
Mechanical transmission part adopts NSK bearing.
